PLEASE NOTE: I've moved! Feel free to continue following me via my new blog Embrace Serendipity.

**All tutorials & the majority of the posts from this blog have been moved over to my new blog**



Dec 25, 2010

Happy Holidays

Just taking a few moments to wish you all a wonderful holiday filled with much love, laughter, health & happiness alongside your loved ones.

Have a fabulous New Year as well filled with many blessings!

I'll be seeing you all in the New Year...

Dec 14, 2010

The Christmas Money Shot Layout


Happy Holidays fellow scrappers & bloggers! Tis the season right? Tis the season for stressing, Christmas pictures, Christmas cards, Christmas music, gift shopping & oh yes--stressing!

This layout is about one of my Christmas traditions which is the annual picture my husband, myself & Toby take in front of the Christmas tree for the holiday cards. As always it took about 24 tries in order to get that perfect shot. Basically the perfect shot is when all three of us are actually looking at the camera. Getting Toby to stare at the camera at the right moment is a task in itself. The three pictures in a row are just a few of the many 'no good' shots taken. The full colored picture is the Christmas Money Shot & it's the actual photo I used for this year's Christmas cards. The journaling tag is behind the title & the poinsettia embellishments. Journaling reads as follows: Every Christmas it's the same routine--two dozen or more pictures taken by the tree. An endless quest, a serach for the Holy Grail, hoping & dreaming that Toby will actually look at the camera at that exact moment the picture is taken. It's like winning the lotto when we finally get the perfect Christmas money shot!
I did a sort of 'staggered' lacing & once again have used eyelets on my page! Thank you Natasha for having me discover the wonderful world of eyelets *wink*. I distressed half of my page & then tucked a thin layer of multi-colored tinsel under the distressed border. This tinsel was from my own stash.


I mainly used the Swirlydoos December kit for this page. Only a few handmade embellishments are from my own stash.

An example of this are the transparent holiday ornaments seen on this page. For a tutorial on how these ornaments were made please go here.

Behind the ornaments I did some masking. I used a flourish mask from Layers of Color & used Forest Moss distress ink. The soft script print you see here was actually a stamp. I used gray ink instead of black because I wanted a subtle script displaying behind the masking & the ornaments.

The tinseled snowy frame seen in this closeup is also something new I tried in order to give my picture a unique holiday frame. If interested on a tutorial on this tinseled snowy frame please go here.


The Christmas butterflies are embellishments from my Etsy shop. If you like them, I made a few extra sets & are currently found in my shop. Feel free to drop by if interested!


Finally here's a closeup of the faux metal & acrylic poinsettia embellishment. I made a brief tutorial for this as well. If interested, please go here. I tucked both the journaling & my title behind this embellishment.

Thank you for stopping by & for visiting! I'm just so very happy that I was able to make a Christmas page in December & not in July which is how it usually works for me!

Stay warm...till my next post...

Faux Metal & Acrylic Poinsettia Tutorial


In this tutorial I'll be showing how I went about making the faux metal & acrylic poinsettia embellishment seen in 'The Christmas Money Shot' layout. I learned this technique from my local scrapbook store on a class I attended.

I completely improvised as I went along for this embellishment which is why I don't have a picture of my list of supplies. I kept adding & changing as I went. This is the list of supplies I finally ended up using: Sizzix die cut, aluminum foil, diamond dust, acrylic or transparency, sturdy scrap paper or grunge board, embossing folder, Big Shot or any other compatible die cut machine, brush, white acrylic paint, scissors, gold stamens or any other suitable item that you'd like to use for the center of the poinsettia, Staz-On black ink, foam pop up dots, glue stick & a partridge in a pear tree! Sorry, had to throw that in there--nix the partridge--whatever that is--I'm guessing it's some kind of bird? Let's get started before I get more sidetracked...


Cut out your layers of petals using the Sizzix die cut. I ended up using grunge board instead of sturdy cardstock for mine. I cut out 2 petals of each size--one from the grungeboard & one from the acrylic. I ended up using all layers except for the smallest petal cut out from acrylic.

Put your petals into an embossing folder with aluminum foil. NOTE: It's preferred that you use the heavy duty aluminum foil for this or else your foil will rip. If you do not have heavy duty aluminum foil, it's recommended that you fold your foil several times in order to thicken it. Technically with the pressure the Big Shot applies when embossing, the foil should simply stick to your die cuts. But I still added a bit of glue to my dies to be extra sure that the foil stays on my dies. Also make sure that when you place your dies in the folder that the foiled side will be the raised side of the embossed designs.


Run both the grungeboard & acrylic through your Big Shot & emboss them. You only need the foil on the grungeboard--not on the acrylic. This is what they'll look like afterwards.

Proceed to cut out the foiled petals with scissors.


Here's a picture of my petals after cutting them out.


Next you alcohol ink your petals. In this picture I have already done this. I used Currant & drops of Copper alcohol inks.


I wanted the embossed designs to show more on my petals so I took my StazOn Black ink & softly tapped on the raised embossed side of all my petals. Do not smear the ink on or you'll end up smearing your petals & then the embossed images will not stand out as much.


After inking my petals I felt that the acrylic petals didn't stand out enough against the foiled petals. So I decided to add some white acrylic paint all along the edges of my acrylic petals. With a brush I tapped or stippled on the white acrylic paint as shown in this picture.


Since I made this poinsettia for a holiday themed page--I decided to add some Diamond Dust to my acrylica petals as well to give it a snow effect. With a glue stick I ran a fine line along the edges of the acrylic petals & then dipped them into the Diamond Dust.

Now I was happy & felt that my acrylic petals will stand out against the foiled petals.


Next you shape & mold your petals. I bent all the acrylic petals up at the base. I bent the foiled petals both up at the base of each petal & then curled the tip of the petals down.


Once the petals are shaped, it's time to start putting your flower together. Pardon my messy painted & inked fingers--as you can see I get down & dirty when I scrap!

I put two to three foam pop up dots between each layer of my poinsettia to give it more dimension. I alternated each layer as I went between foiled petals & acrylic. I also made sure that each petal on my top layer fell in between two petals from the bottom layer.


Finally, I took my top two smallest layers, punched a hole in the center of each one & slid my gold stamens into the center of the flower.

Adhere your top layer & you're done! Just 'fluff up' your flower when done because you tend to flatten your flower as you adhere your layers.

My scrap buddy Natasha who attended this class with me has a very good tutorial on her blog on how to use this faux metal technique with letters in order to make some very attractive & unique titles--feel free to visit her tutorial here.

Hope you enjoyed this tutorial & as always thank you for your visit!

Till my next post...

Snowy Tinseled Frame Tutorial


Hello again fellow scrappers! In this tutorial I'll be showing how I went about making the snowy tinseled frame seen in 'The Christmas Money Shot' page.

My goal was to make the effect of an 'icy' snowed in frame. I'm just glad I finally got to use one of those Martha Stewart tinsels that I've had in my stash since about forever!

Here are your basic list of supplies: Two sided tape (I use the Sookwang brand tape that came with my Scor-Pal, it is 1/4" of an inch wide), Diamond Dust, tinsel, brush & snow texture (if you don't have snow texture, white acrylic paint will work as well).
Start by adhering the two sided tape along the border of your picture. Do not flush the tape against the edge--leave a very fine border. This is so that the tinsel will peek out from behind the diamond dust & snow giving the frame a more defined look.

As you can see, I left a very fine border around the entire frame.

Start peeling the paper off the tape & dipping each sticky side into the tinsel. Thoroughly rub each side into the tinsel in order to ensure that the entire sticky tape is covered in tinsel.

Here's the first layer of the frame. Next we apply the Diamond Dust. If you prefer you don't have to proceed further! If you like a simple tinseled border--then you can stop here.

You will re-apply the two-sided sticky tape ontop of the tinsel. This time, the tape will be flush against the edges.

Peel off the paper & start dipping your frame into the Diamond Dust. Just like the tinsel, make sure you completely cover the sticky tape with the Diamond Dust. I used my fingers to 'rub' the Diamond Dust into the sticky tape.

This is what your frame will look like after the second layer is applied. Now for the third layer which is the snow. Once again--if you like the frame this way--then you're done!

A close-up of the snowy-tinsel border. Notice how the tinsel peeks just right from underneath the 'snow'.

With a brush, 'tap' or stipple the snow or the white acrylic paint all along the edge of your frame.

Now you're done! You can apply this technique to any picture, journaling block etc...your only limit is your imagination!

Till my next post...

Holiday Ornaments Tutorial


This tutorial shows how I went about making the holiday ornaments seen in 'The Christmas Money Shot' layout.

The Bo Bunny Noel Christmas line has a few patterned papers with Christmas ornaments printed on them. I didn't want to ruin the patterned paper & I also wanted the ornaments to be transparent so that the flourish I had masked underneath would show through the ornaments. So cutting the ornaments from the paper wouldn't have worked for me. So I decided to attempt to make my own ornaments with transparencies & alcohol inks. This is the result!

Basic supplies needed for the ornaments are: transparencies or acrylic, gold, silver, bronze etc...embossing powder (color all depends on how you want the ornaments to look) embossing ink, alcohol inks (I used Currant & Copper alcohol inks for my ornaments), circle template, die or punch & your choice of stamps.

I cut the acrylic into circles. I inked my alcohol ink applicator with primarily Currant ink & just a few dabs of Copper. I then proceeded to 'tap' the alcohol ink onto my transparency circles. I kept the inking light because I wanted the designs behind the ornaments to show through. If by some reason you make the ornaments too dark just remember to add a few drops of the Blending Solution to lighten the ink.

Notice how in this picture I had Gold Stickles as well on my list of supplies. I didn't end up using them. This happens to me all the time. I improvise as I go.


Here are my ornaments all inked up & ready to be embossed.


I have a flourish stamp set by See D's that were perfect to create the flourishes on my ornaments. I inked the stamp with embossing ink--stamped the flourish on my acrylic & heat embossed the flourish with gold embossing powder. Remember to emboss slowly & at a distance. If you get too close to the transparency, it'll warp. Also remember that you're stamping on transparency/acrylic. This surface is non-pourous & can get slippery. If you apply too much pressure when stamping you may slip & fudge your design--I made did this mistake several times...



Here are my ornaments--ready to be displayed.

Hope you found this tutorial helpful & as always thank you for stopping by!

Till my next post...